Water softeners are typically used for removing calcium carbonate, manganese, iron and hardness from water sources and are regenerated by brine solutions. The treated water is soft and non scaling/staining. Commercial systems are available in single or twin (duplex) models and domestic units are available in cabinet style models.


Specifications

Type: Semi-Automatic Water Softener
Description: One piece roto moulded plastic cabinet
with lid, containing salt and brine storage
all in the unit
Capacity: 17,000 litres at 100 mg/l hardness
Resin Capacity: 28 litres of high grade softening resin
Control Valve: Erie 3 stage with integrated twist timer Activated regeneration Brass mains connection fittings Adjustable brine draw
Pressure: Vessel Thermowound fibreglass with blow moulded
seamless liner
Flow Rate: Continuous 25 litres per minute Peak 30 litres per minute
Pressure: Maximum 600 kpa (85psi) Minimum 175 kpa (25psi)
Pipe Sizes :Inlet/outlet 1/2” (15mm) Drain 1/2” (15mm)
Salt Storage: 50kg capacity
Salt Usage: 4.5kg per regeneration
Dimensions: 1100mm (h) x 470mm (w) x 340mm (d)
Weight :44kg (dry)