Water softeners are typically used for removing calcium carbonate, manganese, iron and hardness from water sources and are regenerated by brine solutions. The treated water is soft and non scaling/staining. Commercial systems are available in single or twin (duplex) models and domestic units are available in cabinet style models.


Specifications

Type: Semi-Automatic Water Softener
Description: One piece roto moulded plastic cabinet with lid, containing salt and brine storage all in the unit
Capacity: 10,000 litres at 100 mg/l hardness
Resin Capacity: 18 litres of high grade softening resin
Control: Valve Erie 3 stage with integrated twist timer Activated regeneration Brass mains connection fittings
Adjustable brine draw
Pressure Vessel: Thermowound fibreglass with blow moulded
Flow Rate: Continuous 20 litres per minute
Peak 25 litres per minute
Pressure: Maximum 600 kpa (85psi)
Minimum 175 kpa (25psi)
Pipe Sizes: Inlet/outlet 1/2” (15mm)
Drain 1/2” (15mm)
Salt Storage: 50kg capacity
Salt Usage: 3kg per regeneration
Dimensions: 1100mm (h) x 470mm (w) x 340mm (d)
Weight: 32kg (dry)